INSTALL

     ===========================================

            OpenSIPS Installation Notes

               https://opensips.org/

     ===========================================

  This memo gives you hints how to set up OpenSIPS quickly. To 
  understand how OpenSIPS works and how to configure it properly,
  read admin's guide available from OpenSIPS website. We also
  urge you to read latest ISSUES (available from OpenSIPS website 
  too) and check for potential problems in this release.
  Users of previous releases are encouraged to read NEWS to
  learn how to move to this new OpenSIPS version.
  

TOC

1. Supported Architectures and Requirements
2. Howto Build opensips From Source Distribution
3. Quick-Start Installation Guide
   A) Getting Help
   B) Disclaimers
   C) Quick Start
   D) opensips with Persistent Data Storage
4. Troubleshooting



1. Supported Architectures and Requirements
-------------------------------------------

Supported architectures: Linux/i386, Linux/armv4l, FreeBSD/i386, OpenBSD/i386
Solaris/sparc64, NetBSD/sparc64
(for other architectures the Makefiles might need to be edited)

Build configuration options are stored in Makefile.conf.

Requirements:


- gcc / suncc / icc : gcc >= 2.9x; 4.[012] recommended (it will work with 
   older version but it might require some options tweaking for best 
   performance)
- bison or yacc (Berkley yacc)
- flex
- GNU make (on Linux this is the standard "make", on FreeBSD and Solaris is
   called "gmake") version >= 3.79.
- sed and tr (used in the makefiles)
- GNU tar ("gtar" on Solaris) and gzip if you want "make tar" to work
- GNU install or BSD install (on Solaris "ginstall") if you want "make
  install", "make bin", "make sunpkg" to work
- openssl if you want to compile the TLS support
- libsctp if you want to compile the SCTP support
- libmysqlclient & libz (zlib) -libs and devel headers- if you want mysql DB
   support (the db_mysql module)
- libpq / postgresql -libs and devel headers- if you want postgres DB
   support (the db_postgres module)
- unixodbc -libs and devel headers- if you want unixodbc DB
   support (the db_unixodbc module)
- libexpat if you want the jabber gateway support (the jabber module) or the
   XMPP gateway support
- libxml2 if you want to use the cpl_c (Call Processing Language) or
   the presence modules (presence and pua*)
- libradius-ng -libs and devel headers- if you want to use functionalities
   with radius support - authentication, accounting, group support, etc
- unixodbc - libs and devel headers - if you want UNIXODBC support as
   DB underlayer
- libxmlrpc-c3 - libs and devel headers - if you want to have XML-RPC support
   for the Management interface (MI)
- libperl - libs and devel headers - if you want PERL connector to support
   perl scripting from you config file (perl module)
- libsnmp9 - libs and devel headers - if you want SNMP client functionality 
   (SNMP AgentX subagent) for opensips
- libldap libs and devel headers v2.1 or greater - if you want LDAP support
- libconfuse and devel headers - if you want to compile the carrierroute
  module
- m4 - if you want to use M4 templating

OS Notes:

- FreeBSD/OpenBSD/NetBSD: make sure gmake, bison or yacc & flex are installed
- Solaris: as above; you can use Solaris's yacc instead of bison. You might
  need also gtar and ginstall.

Build configuration is stored in Makefile.conf. The first make invocation
copies Makefile.conf.template when Makefile.conf does not exist. You may also
create it explicitly:

cp Makefile.conf.template Makefile.conf

Edit Makefile.conf before compiling:

- exclude_modules lists modules omitted from the normal modules and all
  targets. Add names to exclude more modules.
- include_modules forces named modules into the build, including modules from
  exclude_modules. Install each module's external dependencies first.
- MODULE_DIRS lists the module source collections. Each directory is exposed
  as a build target, while all-modules builds all configured collections.
- DEFS controls OpenSIPS compile-time definitions. The template documents the
  available definitions. Some allocator and locking definitions are mutually
  exclusive, so only enable options whose behavior is understood.
- CC_EXTRA_OPTS and LD_EXTRA_OPTS add compiler and linker flags. For example:

    CC_EXTRA_OPTS += -O2 -march=native
    LD_EXTRA_OPTS += -Wl,--as-needed

- PREFIX controls the default installation prefix and defaults to /usr/local/.
  Use the same prefix while building and installing because the default
  configuration path is compiled into the binary.

Run make proper before rebuilding after changing DEFS, compiler flags, or
linker flags.


2. Howto Build opensips From Source Distribution
-------------------------------------------

(NOTE: if make doesn't work try gmake  instead)

- compile with default options (TLS support is enabled by "TLS=1"; SCTP
support is enabled by "SCTP=1"):

make   #builds only opensips core, equivalent to make opensips
make modules

# Community-contributed modules, which are not maintained by the OpenSIPS core
# team, live under modules-contrib and are built only when explicitly requested:

make modules-contrib
make all-modules         # builds every configured module collection

or make all #builds the core, utilities and the default modules collection

-compile debug mode version

make mode=debug all

-compile only the textops module

make modules=modules/textops modules

-compile only selected community-contributed modules

make modules=modules-contrib/example modules-contrib

-compile all the "default" modules except textops and db_mysql

make skip_modules="textops db_mysql" modules

-compile all default modules and include uri_radius (not compiled by default):

make include_modules="uri_radius" modules

-compile all the modules from the modules subdirectory (even the one excluded
by default):

make exclude_modules="" modules

-compile all the modules from the modules subdirectory excluding exec:

make exclude_modules=exec modules
or
make exclude_modules="" skip_modules=exec modules

-generate README file for textops module

make modules=modules/textops modules-readme

-compile with gcc-3.2 instead of gcc

make CC=gcc-3.2 all

or

CC=gcc-3.2 make all


Make targets:

Clean:

make clean   (clean the modules too)
make proper  (clean also the dependencies)
make distclean (the same as proper)
make maintainer-clean (clean everything, including auto generated files,
 tags, *.dbg a.s.o)

Compile:

make proper
make
(or gmake on non-Linux systems)
make modules 
or make modules exclude_modules="exec" etc.

Make tags:

make TAGS

Create a tar.gz with the sources (in ../):

make tar

Create a tar.gz with the binary distribution (in ../):

make bin

Create a gzipped solaris package (in ../):

make sunpkg

Create debian packages (in ../):

make deb

or

dpkg-buildpackage

Install:

make prefix=/usr/local  install

Note: If you use prefix parameter in make install then you also need
to use this parameter in previous make commands, i.e. make, make modules,
or make all. If you fail to do this then OpenSIPS will look for the default
configuration file in a wrong directory, because the directory of the
default configuration file is hard coded into opensips during compile time. 
When you use a different prefix parameter when installing then the 
directory hard coded in opensips and the directory in which the file will be 
installed by make install will not match. (You can specify exact location
of the configuration file using -f parameter of opensips).

For example, if you do the following:
make all
make prefix=/ install

Then the installation will put the default configuration file into
/etc/opensips/opensips.cfg (because prefix is /), but opensips will look for the
file in /usr/local/etc/opensips/opensips.cfg (because there was no prefix
parameter in make all and /usr/local is the default value of prefix).

Workaround is trivial, use the same parameters in all make commands:
make prefix=/ all
make prefix=/ install

That applies to other make parameters as well (for example parameters
"modules" or "exclude_modules"). Prefer storing persistent settings in
Makefile.conf instead of repeating them on each make invocation.


3. Quick-Start Installation Guide
----------------------------------------------

A) Getting Help

This guide gives you instructions on how to quickly set up OpenSIPS 
on your box. In case the default configuration does not fly, check 
documentation at opensips site
  https://opensips.org/
to learn how to configure OpenSIPS for your site.

If the documentation does not resolve your problem you may try contacting 
our user forum by E-mail at users@opensips.org -- that is the mailing list 
of opensips community. To participate in the mailing list, subscribe at the 
following web address:
  https://opensips.org/cgi-bin/mailman/listinfo/users


B) Disclaimers

Note well the default "quick-start" configuration is very simple in order 
to be easily installable. It provides minimum features. Particularly, 
authentication is by default disabled, which means anyone can register using
any name with the server. (This is on purpose to avoid installation 
dependencies on MySQL which is needed for storing user credentials.)


C) Quick Start

The following step-by step guide gives you instructions how to install the 
sql-free distribution of opensips. If you need persistence and authentication, 
then you have to install additional MySql support -- proceed to section D)
after you are finished with C).

1) Download an RPM or debian package from our site
     https://opensips.org/pub/opensips/latest/packages/
If you don't use an rpm or debian based distribution, see if corresponding 
packages are available or try our tar.gz'ed binaries.
If you use Gentoo Linux you do not have to download a package.
For debian, packages are available via the Debian official repositories for
testing and unstable. For stable, use the project's repository at:
     deb https://opensips.org/debian stable main

2) install the package
RPM:
    rpm -i <package_name>
debian:
    dpkg -i <package_name>
    or if APT repository is used:
    apt-get install <package_name> 
gentoo:
    emerge opensips
    (or if use only stable packets: ACCEPT_KEYWORDS="~x86" emerge opensips)
tar.gz:
    cd /; tar zxvf <package_name>_os_arch.tar.gz
    (it will install in /usr/local/, and the configuration file in
     /usr/local/etc/opensips/opensips.cfg)
Solaris:
    gunzip <package_name>.gz ; pkgadd -d <package_name>
*BSD:
    pkg_add package_name
    Note that the OpenSIPS package is in the FreeBSD package tree included, 
    but is not present in the OpenBSD and NetBSD repository. You'll probably
    have more luck trying to build directly from the source with the tar.gz,
    as the package files for this systems are somewhat out of date at the
    moment.

3) start the server
RPM + gentoo:
    /etc/init.d/opensips start
debian:
    opensips is started automatically after the install
    (in case something fails you can start it with /etc/init.d/opensips start)
tar.gz:
    the tar.gz does not include an init.d script, you'll have to create one of
    your own or adapt one from the source distribution (debian/init.d,
    rpm/opensips.init.*, gentoo/opensips.init)
    You can start opensips directly with /usr/local/sbin/opensips.
Solaris:
    see tar.gz.

4) optionally, watch server's health using the opensips-cli utility
    Note that the old opensipsctl tool has been removed - for using
    opensips-cli please refer to the project's page:
    https://github.com/OpenSIPS/opensips-cli

5) Register with the server using your favourite SIP User Agent.
   For example, users of Windows Messenger need to set
   in Tools->Options->Accounts the following values:
     Sign-in Name: <username>@<your_server_address>
     Advanced->Configure Settings (on)
     Advanced->Server: <your_server_address>
     Connect Using: UDP



D) opensips with Persistent Data Storage

The default configuration is very simple and features many simplifications. 
In particular, it does not authenticate users and loses User Location database 
on reboot. To provide persistence, keep user credentials and remember users' 
locations across reboots, opensips can be configured to use MySQL. Before you
proceed, you need to make sure MySQL is installed on your box.

1) Download the package containing mysql support for opensips from: 
    https://opensips.org/pub/opensips/
    (rpm and deb provided, most of the binary tar.gz distributions and the 
     solaris package include it; if it is not present you'll have to rebuild
     from the source).
   For gentoo please include 'mysql' to your USE variable in /etc/make.conf
   or give it as variable to the emerge command.
2) install the package
    RPM based:
      rpm -i <package_name>
    DEB based:
      dpkg -i <package_name> 
      or if APT repository is used
      apt-get install <package_name> 
    Gentoo Linux:
      emerge opensips
      (if do not want to put 'mysql' into your USE variable you can type:
      USE="mysql" emerge opensips)
3) create SQL tables
    Create the SQL database using the opensips-cli tool, database module:
      opensips-cli -x database create
    For more information please refer to:
      https://github.com/OpenSIPS/opensips-cli/blob/master/docs/modules/database.md

4) configure opensips to use SQL
    uncomment all lines in configuration file opensips.cfg which are related to 
    authentication:
    - loadmodule "/usr/lib/opensips/modules/db_mysql.so"
    - loadmodule "/usr/lib/opensips/modules/auth.so"
    - loadmodule "/usr/lib/opensips/modules/auth_db.so"
    - modparam("usrloc", "working_mode_preset", "single-instance-sql-write-back")
    - modparam("auth", "calculate_ha1", yes)
    - modparam("auth_db", "password_column", "password")
    - if (!www_authorize("sip.org", "subscriber")) {
        www_challenge("sip.org", "0"); 
        break;
      };
5) be sure to replace realm, the first parameter in www_* actions, 
   with name of your server; some broken UAC implementations don't 
   authenticate otherwise; the authentication command in your
   configuration script should look then like this:
      if (!www_authorize("myserver.foobar.com", "subscriber")) {
        www_challenge("myserver.foobar.com", "0"); 
        break;
      }
6) restart the server
    /etc/init.d/opensips restart
7) you can now start  managing the server using the opensips-cli utility

4. Troubleshooting
------------------

Q: SIP requests are replied by opensips with "483 Too Many Hops" or 
   "513 Message Too Large"

A: In both cases, the reason is probably an error in request routing script 
   which caused an infinite loop. You can easily verify whether this happens 
   by watching SIP traffic on loopback interface. A typical reason for
   misrouting is a failure to match local domain correctly. If a server fails
   to recognize a request for itself, it will try to forward it to current URI
   in believe it would forward them to a foreign domain. Alas, it forwards the
   request to itself again. This continues to happen until value of
   max_forwards header field reaches zero or the request grows too big.
   Solutions is easy: make sure that domain matching 
   is correctly configured. A quick way to achieve that is to introduce a config
   option to opensips.cfg: alias=domainname, where domainname shall be replaced
   with name of domain, which you wish to server and which appears in
   request-URIs.